Qmark CDF Series Commercial Downflow Ceiling Heaters
IDEAL SPACES | Bathrooms; Offices; Conference Rooms; Lobbies; Waiting Rooms; Entrance WaysCOLORS | Northern White; Navajo White
TEMP RANGE | 45°- 90°F
CFM | 300
RECESSED | 23-3/4" W x 23-3/4" L x 7" D
SURFACE | 16-1/2" W x 20" L x 5-3/4" D
Qmark CDF Series Features
- CDFSE "surface enclosures" are designed to mount flat on the ceiling and extend only 6 in. into the room
- CDFRE "recessed enclosures" have no protrusions outside recess box, allowing the heater to recess only 7 in. into ceiling space. Mounts in T-Bar or permanent ceiling with trim ring
- 208V and 240V heaters can be field-converted from single- to three-phase operation. 5,000-watt heater can be field-converted to 3,800 or 2,500 watts and 4,000-watt heater to 3,000 or 2,000 watts
- BMS-compatible with use of relays
- Three adjustable airflow patterns from 14 ft. ceilings: wide, narrow or asymmetrical patterns
- Automatic fan delay eliminates cold drafts on start-up and discharges residual heat from the heater body during shut down
- Automatic thermal cutout: shuts off the heater in the event of over-heating and reactivates heater when temperature returns to normal
- Easy installation: Thumb pins align and temporarily hold enclosure cover to heating section freeing both hands to finish installation
There are no products listed under this category.