Product Overview
Siemens 547-205A, RPM SM BAC +/-1.0WC( 250PA)0.5%FS
The Siemens Room pressure Monitor (RPM) is designed for critical low differential pressure applications that require stringent pressure monitoring and alarming. The unit can be configured to monitor positive or negative pressure in protected environments and hospital isolation rooms per CDC guidelines.
Features
- Incorporates dead end differential pressure transmitter suitable for industrial and bio-hazard applications previously un-served by the Differential pressure Monitor (DPM).
- Available in pressure ranges from +/-0.05wc to +/-5wc, with Full Scale accuracy levels of 0.5% or 0.25%.
- Touch Screen Display allows full acceSS and editing without use of external tools, or laptops.
- High Resolution pressure output signal selectable as 0-10vdc, 0-5vdc or 4-20A.
- Easier to install and calibrate than through the wall technology.
- Touch screen display with Green, Yellow and Red backlighting.
- password enabled for configuration and operation.
- Local audible alarm and Visual red and green room status lights.
- Door status monitor
- SPST alarm relay
- Positive and negative pressure monitoring with Bar graph display
- Bar graph display
- Easy to install, set-up and calibrate
- CE and RoHS compliant
- Fingertip operation
- password security
- Local display of room
Technical Data
Communications: RS485 for both P1 and BACNET MS/TP
Installation Requirements: Mounts on standard 2x4 junction box
Unit Dimensions: 8H x 5.1W x 1.8D
Box Dimensions: 10.5H x 9.25W x 3D
Tools: No special tools required.
Training: No special training is required.
Certifications
- CAN/CSA C22.2 No 61010-1.04
- C-Tick
- CE Mark
- RoHS Compliant
The Siemens Room pressure Monitor (RPM) is designed for critical low differential pressure applications that require stringent pressure monitoring and alarming. The unit can be configured to monitor positive or negative pressure in protected environments and hospital isolation rooms per CDC guidelines.
Features
- Incorporates dead end differential pressure transmitter suitable for industrial and bio-hazard applications previously un-served by the Differential pressure Monitor (DPM).
- Available in pressure ranges from +/-0.05wc to +/-5wc, with Full Scale accuracy levels of 0.5% or 0.25%.
- Touch Screen Display allows full acceSS and editing without use of external tools, or laptops.
- High Resolution pressure output signal selectable as 0-10vdc, 0-5vdc or 4-20A.
- Easier to install and calibrate than through the wall technology.
- Touch screen display with Green, Yellow and Red backlighting.
- password enabled for configuration and operation.
- Local audible alarm and Visual red and green room status lights.
- Door status monitor
- SPST alarm relay
- Positive and negative pressure monitoring with Bar graph display
- Bar graph display
- Easy to install, set-up and calibrate
- CE and RoHS compliant
- Fingertip operation
- password security
- Local display of room
Technical Data
Communications: RS485 for both P1 and BACNET MS/TP
Installation Requirements: Mounts on standard 2x4 junction box
Unit Dimensions: 8H x 5.1W x 1.8D
Box Dimensions: 10.5H x 9.25W x 3D
Tools: No special tools required.
Training: No special training is required.
Certifications
- CAN/CSA C22.2 No 61010-1.04
- C-Tick
- CE Mark
- RoHS Compliant
